Proxim wireless ORiNOCO AP-4000MR-LR User's Guide download pdf (Page 86)

Advanced Configuration AP-4000MR User Guide

Management

• Telnet Port Number: The default port number for Telnet applications is 23. However, you can use this field if you

want to change the Telnet port for security reasons (but your Telnet application also must support the new port

number you select). You must reboot the Access Point if you change the Telnet Port.

• Telnet Login Idle Timeout (seconds): Enter the number of seconds the system will wait for a login attempt. The AP

terminates the session when it times out. The range is 30 to 300 seconds; the default is 60 seconds.

• Telnet Session Idle Timeout (seconds): Enter the number of seconds the system will wait during a session while

there is no activity. The AP will terminate the session on timeout. The range is 60 to 36000 seconds; the default is 900

seconds.

Secure Shell (SSH) Settings

The AP supports SSH version 2, for secure remote CLI (Telnet) sessions. SSH provides strong authentication and

encryption of session data.

The SSH server (AP) has host keys - a pair of asymmetric keys - a private key that resides on the AP and a public key

that is distributed to clients that need to connect to the AP. As the client has knowledge of the server host keys, the client

can verify that it is communicating with the correct SSH server. The client authentication is performed as follows:

• Using a username/password pair if RADIUS Based Management is enabled; otherwise, using a password to

authenticate the user over a secure channel created using SSH.

SSH Session Setup

An SSH session is setup through the following process:

• The SSH server public key is transferred to the client using out-of-band or in-band mechanisms.

• The SSH client verifies the correctness of the server using the server’s public key.

• The user/client authenticates to the server.

• An encrypted data session starts. The maximum number of SSH sessions is limited to two. If there is no activity for a

specified amount of time (the Telnet Session Timeout parameter), the AP will timeout the connection.

SSH Clients

The following SSH clients have been verified to interoperate with the AP’s server. The following table lists the clients,

version number, and the website of the client.

For key generation, OpenSSH client has been verified.

Configuring SSH

Perform the following procedure to set the SSH host key and enable or disable SSH:

1. Click Configure > Management > Services

2. Select the SSH Host Key Status from the drop down menu.

NOTE: SSH Host Key Status can not be changed if SSH status or Secure Management is enabled.

3. To enable/disable SSH, select Enable/Disable from the SSH (Secure Shell) Status drop-down menu.

NOTE: When Secure Management is enabled on the AP, SSH will be enabled by default and cannot be disabled.

Clients Version Website

OpenSSH V3.4-2 http://www.openssh.com

Putty Rel 0.53b http://www.chiark.greenend.org.uk

Zoc 5.00 http://www.emtec.com

Axessh V2.5 http://www.labf.com

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 266 267

No comments

Proxim wireless ORiNOCO AP-4000MR-LR User's Guide Page 86