Proxim wireless ORiNOCO AP-4000MR-LR User's Guide download pdf (Page 150)

Advanced Configuration AP-4000MR User Guide

SSID/VLAN/Security

150

• When VLAN is "untagged" and CMOB Status is enabled, the Converged Mobility (CMOB) functionality does not

work.

6. Select the status of Closed System to control whether the SSID is advertised in the beacon and manage the way

probe requests are handled, as follows:

• Enable: The SSID is not advertised in the beacon, and the AP will respond to probe requests with an SSID only if

the client has specified the SSID in the probe request. If the client sends a probe request with a null or “ANY”

SSID, the AP will not respond.

• Partial: The SSID is advertised in the beacon, and the AP will not respond to "ANY" SSID requests. The Partial

setting reduces network traffic by eliminating the repeated broadcast of SSIDs in probe responses.

• Disable: The SSID is advertised in the beacon, and the AP will respond with each configured SSID, whether or

not an SSID has been specified in the probe request.

7. Enable Broadcast Unique Beacon using the drop-down menu. When enabled, Broadcast Unique Beacon allows the

broadcast of a up to four unique beacons when the AP is configured for multiple SSIDs. If Closed System (above) is

set to Partial or Disable, each beacon (up to four) will be broadcast a single SSID. If more than four SSIDs are

configured, then three SSIDs will be broadcast in individual beacons; the fourth and subsequent SSIDs will be

combined in one beacon and will not be broadcast. If Closed System is set to Enable, the SSID will not be broadcast

in the beacon. If Broadcast Unique Beacon is disabled, a combined beacon will be broadcast.

NOTE: Enabling Broadcast Unique Beacon will lower the throughput of the AP by 2-4%. Enabling Broadcast Unique

Beacon simultaneously with Rogue Scan will cause a drift in the beacon interval and the occasional missing of

beacons.

8. Enable or disable the SSID Authorization status from the drop-down menu. SSID Authorization is the RADIUS-based

authorization of the SSID for a particular client. The authorized SSIDs are sent as the tunnel attributes.

9. Enable or disable RADIUS accounting on the VLAN/SSID under the Accounting Status drop-down menu.

10.Enable or disable RADIUS MAC authentication status on the VLAN/SSID under the RADIUS Authentication Status

drop-down menu.

11.Enable or disable MAC Access Control List status on the VLAN/SSID under the MAC ACL Status drop-down menu.

12.Enter the Rekeying Interval in seconds (between 300 and 65525). When set to 0, this parameter is disabled. The

default is 900 seconds.

13.Enter the Security Profile used by the VLAN in the Security Profile field.

NOTE: If you have two or more SSIDs per interface using a Security Profile with a security mode of Non Secure, be

aware that security being applied in the VLAN is not being applied in the wireless network.

14.Define the

RADIUS Server Profile Configuration for the VLAN/SSID:

• RADIUS MAC Authentication Profile

• RADIUS EAP Authentication Profile

• RADIUS Accounting Profile

If 802.1x, WPA, or 802.11i security mode is used, the RADIUS EAP Authentication Profile must have a value.

A RADIUS Server Profile for authentication for each VLAN shall be configured as part of the configuration options for

that VLAN. RADIUS profiles are independent of VLANs. The user can define any profile to be the default and

associate all VLANs to that profile. Four profiles are created by default, “MAC Authentication”, “EAP Authentication”,

Accounting”, and “Management”.

15.Specify a QoS Profile. See the Policy section for more information.

16.Set the 802.1p Priority given to packets tagged with this VLAN ID. Enter a number between 0-7.

17.Set the Maximum TX Bandwidth in Kbps. If this parameter is set to 0, full bandwidth is available.

18.Set the Maximum RX Bandwidth in Kbps. If this parameter is set to 0, full bandwidth is available.

19.If editing an entry, enable or disable the parameters on this page using Status drop-down menu. If adding a new entry,

this drop-down menu will not appear.

20.Reboot the AP.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 266 267

Comments to this Manuals

No comments

Proxim wireless ORiNOCO AP-4000MR-LR User's Guide Page 150

Comments to this Manuals

Related products and manuals for Routers Proxim wireless ORiNOCO AP-4000MR-LR