Proxim wireless ORiNOCO AP-4000MR-LR User's Guide download pdf (Page 41)

Installation and Initialization AP-4000MR User Guide

Initialization

6. Click on the appropriate link to access the download page.

7. Use the instructions in the following sections to install the new software.

Install Software with HTTP Interface

Use the Update AP via HTTP tab to update the AP with the latest software image.

1. Click Commands > Update AP > via HTTP.

Figure 2-10 Update AP via HTTP Command Screen

2. From the File Type drop-down menu, select Image.

3. Use the Browse button to locate or manually type in the name of the file (including the file extension) you downloaded

from the Proxim Knowledgebase. If typing the file name, you must include the full path and the file extension in the file

name text box.

4. To initiate the HTTP Update operation, click the Update AP button.

A warning message advises you that a reboot of the device will be required for changes to take effect.

Figure 2-11 Warning Message

5. Click OK to continue with the operation or Cancel to abort the operation.

6. If the operation is unsuccessful, you will receive an error message. If this occurs, see the Troubleshooting chapter or

attempt installing the software with a TFTP server, as described in the next section.

If the operation is successful, you will receive a confirmation message.

7. Reboot the AP as follows:

• Click Commands > Reboot.

• Enter 0 in the Time to Reboot field.

• Click OK.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 266 267

No comments

Proxim wireless ORiNOCO AP-4000MR-LR User's Guide Page 41