Proxim wireless ORiNOCO AP-4000MR-LR User's Guide Page 214
- Page / 267
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Command Line Interface (CLI) AP-4000MR User Guide
Configuring the AP using CLI commands
214
Choose from the following values:
Set Communication Ports
[Device-Name]>set httpport <HTTP port number (default is 80)>
[Device-Name]>set telport <Telnet port number (default is 23)>
Configure Secure Socket Layer (HTTPS)
Enabling SSL and configuring a passphrase allows encrypted Secure Socket Layer communications to the AP through
the HTTPS interface.
[Device-Name]>set sslstatus <enable/disable>
The user must change the SSL passphrase when uploading a new certificate/private key pair, which will have a
corresponding passphrase.
[Device-Name]>set sslpassphrase <SSL certificate passphrase>
[Device-Name]>show http (to view all HTTP configuration information including SSL.)
Set Telnet Session Timeouts
[Device-Name]>set tellogintout <time in seconds between 1 and 300 (default is 30)>
[Device-Name]>set telsessiontout <time in seconds between 1 and 36000 (default is 900)>
Configure Serial Port Interface
NOTE: To avoid unexpected performance issues, leave Flow Control at the default setting (none) unless you are sure
what this setting should be.
[Device-Name]>set serbaudrate <2400, 4800, 9600, 19200, 38400, 57600>
[Device-Name]>set serflowctrl <none, xonxoff>
[Device-Name]>show serial
Figure A-15 Result of “show serial” CLI Command
Configure Syslog
[Device-Name]>set syslogpriority <1–7 (default is 6)>
[Device-Name]>set syslogstatus <enable/disable>
[Device-Name]>set sysloghbstatus <enable/disable> (default is disable)
Interface Bitmask Description
0 or 2 = Disable (all interfaces) All management channels disabled
1 or 3 = Ethernet only Ethernet only enabled
4 or 6 = Wireless A only Wireless A only enabled
8 or 10 = Wireless B only Wireless B only enabled
12 = Wireless A and Wireless B Wireless A and Wireless B enabled
13 or 15 = Enable all interfaces All management channels enabled
- ORiNOCO AP-4000MR 1
- Copyright 2
- Trademarks 2
- OpenSSL License Note 2
- Introduction 9
- Mesh Networking 10
- Mesh Network Configuration 12
- Guidelines for Roaming 13
- HTTP/HTTPS Interface 14
- Command Line Interface 14
- SNMP Management 14
- SSH (Secure Shell) Management 15
- Overview 17
- Power/Ethernet Port LEDs 17
- Power Injector 18
- Serial Connection 18
- Antenna Connectors 18
- Prerequisites 20
- System Requirements 21
- Product Package 22
- Hardware Installation 24
- Step 1: Choose a Location 25
- Step 2: Unpack Shipping Box 25
- Step 3: Assemble the Cable 26
- Apply Teflon 26
- Step 5: Mount the Unit 28
- Step 6: Plug in the Cables 29
- Step 7: Power on the Unit 30
- Step 8: View LEDs 30
- Step 9: Tighten the Cables 31
- Adjusting Tx Output Power 34
- Initialization 35
- Logging In 37
- Using the Setup Wizard 38
- Installing the Software 40
- System Status 43
- Advanced Configuration 44
- Dynamic DNS Support 47
- IP Configuration 48
- DHCP Server 49
- DHCP Relay Agent 51
- Link Integrity 52
- Web (HTTP) Interface 66
- MIB (SNMP) Requirements 66
- VLAN on Ethernet Port 68
- Once this 70
- Management VLAN Configuration 71
- Interface Requirements 71
- Ethernet 76
- Management 82
- IP Access Table 83
- Services 83
- Filtering 94
- Static MAC 95
- Advanced 98
- TCP/UDP Port 100
- Rogue Scan 112
- Figure 4-41 Rogue Scan Screen 115
- Spanning Tree 116
- Storm Threshold 117
- Intra BSS 118
- Packet Forwarding 118
- Priority Mapping 121
- Radius Profiles 125
- Configuring Radius Profiles 126
- RADIUS Accounting 129
- Wireless Domain Configuration 131
- SSID/VLAN/Security 133
- Management VLAN 135
- Uplink VLAN ID Table 136
- Security Profile 137
- MAC Access 143
- Wireless-A or Wireless-B 144
- Monitoring 151
- IP/ARP Table 154
- Learn Table 155
- Interfaces 158
- Station Statistics 161
- Mesh Statistics 163
- Link Test 164
- Commands 166
- TFTP File Transfer Guidelines 167
- HTTP File Transfer Guidelines 167
- Update AP 168
- Update AP via HTTP 169
- Retrieve File 171
- Retrieve File via HTTP 172
- Commands AP-4000MR User Guide 173
- Help Link 176
- Troubleshooting 177
- Symptoms and Solutions 178
- Client Connection Problems 180
- VLAN Operation Issues 180
- CMOB Operation Issues 181
- Power-Over-Ethernet (PoE) 181
- Recovery Procedures 183
- set ipaddrtype static 187
- reboot 0 187
- Related Applications 188
- Command Line Interface (CLI) 189
- General Notes 190
- CLI Error Messages 191
- Bootloader CLI 192
- CLI Command Types 194
- Parameter Control Commands 198
- Using Tables and Strings 202
- Log into the AP using Telnet 204
- Other Network Settings 210
- (Mbits/sec)> 212
- CLI Monitoring Parameters 219
- Parameter Tables 220
- System Parameters 222
- Network Parameters 224
- Interface Parameters 228
- Management Parameters 235
- Filtering Parameters 238
- Alarms Parameters 241
- Bridge Parameters 243
- RADIUS Parameters 245
- Security Parameters 246
- VLAN/SSID Parameters 248
- Other Parameters 248
- CLI Batch File 252
- Reboot Behavior 253
- ProximUnify (PXU) Management 254
- ASCII Character Chart 256
- Specifications 257
- Advanced Bridging Functions 258
- Security Functions 259
- Network Functions 259
- Hardware Specifications 260
- Available Channels 261
- Support Options 264
- Statement of Warranty 266
- Other Information 267
Related products and manuals for Routers Proxim wireless ORiNOCO AP-4000MR-LR
(274 pages)© 2020, manymanuals.com. All rights reserved. | 1.422 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals